Excellent quality wood shavings pellet machine for hot sale is a
kind of pellet making equipment which takes shavings as the main
raw materials, which is suitable for all stoves, which is suitable
for rural, urban and family units. It is the necessary fuel for
cooking, heating, bathing and boiler, especially essential for the
biomass power plants.
In practical work, wood shavings pellet machine always appear some
small problems. For example, when in operation, sometimes the
pellets have small density, or they are loose or even cannot form
pellets. Some other times, the material will block the pressing die
holes. Why do these problems happen?
As a matter of fact, to press wood sawdust into pellets, there are
2 preconditions. The moisture content of sawdust must reach certain
range, which is 8%-12%. The pressure of sawdust should reach 50MPA,
which means the compression ratio of pressing die hole must be
proper. Only with right compression ratio can the wood pellet mill
operate normally. When using the wood pellet mills, remember to
carefully read the Instruction Manual first.
Also, there are some tips for correctly operating the excellent
quality wood shavings pellet machine for hot sale:
1. Check the tightness of belt, and if the motor shaft and wood
pellet mill shaft are paralleled.
2. Before starting the wood pellet mill, first see whether the
motor and pellet mill is well lubricated.
3. After installing the wood pellet mill, check if all parts are
fastened tightly. If there is looseness, tighten it.
4. If the wood pellet mill should be operated for long-term, fix it
onto a cement base. If the working place is not constant, the wood
pellet mill and electric motor should be installed on an angle iron
5. When at work, keep an eye on the operation of wood pellet mill
and feed the raw material regularly to prevent blockage. Don’t make
the machine operate with overload for long time. If there is
vibration, strange noise, temperature raise or material spaying
out, stop the machine immediately to check. After trouble clearing,
put it into normal operation.
6. Before feeding into wood pellet mill, see if there are
impurities like copper, iron or stone pieces in the raw material to
prevent damage to the machine. When feeding raw material manually,
stand at the side of wood pellet mill to protect yourself.
It is never complicated to operate a wood pellet mill correctly. A
famous saying goes 'Practice makes perfect'. We believe you will
find the best way to use the wood pellet mill by yourself.
Address: High and New Industrial Zone, Kexue Revenue, High and New
Technology Industrial Development Zone, Zhengzhou, China